Contact Us

Contact Person : Andrea

Phone Number : 0086-371-60547601

WhatsApp : +8613598873045

Free call

2kV Up To 25kV Special Cables Mining Power Cable EPR Insulation Braided Metallic Shield

Minimum Order Quantity : 1000meters Packaging Details : drum
Delivery Time : 20days after payments Payment Terms : L/C, T/T
Place of Origin: Henan Brand Name: CN CABLE
Certification: IEC Model Number: Power cable

Detail Information

Conductor: Extra- Flexible Copper Conductor, According ASTM B3 Conductor Shield: Semi-conducting Tapes Shield Applied Helically Over The Conductor
Insulation: 100% Insulation Level Oil, Ozone And Water Resistant Ethylene Propylene Rubber (EPR) 90°C Normal Temperature Operation, 130°C Emergency Overload Condition, 250°C Short Circuit Condition Insulation Shield: Up To 2kV Polyester Tape Applied Over The Insulation; Over 2kV Semi-conducting Tapes Shield Applied Over The Insulation
Metallic Shield: Tinned Copper Braid (60% Minimum Coverage) Over Each Conductor Phases Identification: By Colored Fibers Black, White And Red
Ground Wires: Two Bare, Rope-lay Flexible Stranded, Copper Conductors Ground Check: One Yellow Insulated, Rope-lay Flexible Stranded, Copper Conductor
Core Assembly: Three Phase Conductors, Two Bare Ground And One Ground Check Conductors Are Cabled Together With A Left Hand Lay, Plus A Binder Tape Applied Over The Assembly Reinforcement: An Open Reinforcement Is Applied Over The Core For Mechanical Strength
Jacket: Extra Heavy Duty Elastomer Jacket Highly Resistant To Cutting, Tear, Sunlight, Ozone And Flame. It Has An Excellent Resistance To Heat, Moisture, Water, Oil And Most Chemicals Commonly Present At Mining Field Operations. The Standard Jacket Is Black And Me
High Light:

copper welding cable

,

special power cable

Product Description

 

2 kV Up to 25 kV Mining Power Cable, EPR Insulation, Braided Metallic Shield, Thermosetting Rubber Extra Heavy Duty Jacket

 

Application
For heavy duty medium voltage service as power supply for mining equipment where maximum safety is required. Commonly used to feed heavy mobile mining equipment such as shovels, dredges, drilling rigs, other off track equipment. Also suitable for medium voltage distribution as a flexible power supply cable in extra heavy duty operations. SHD-GC cables are designated to operate on three phases AC circuit, where grounding conductors and ground check conductor are required. Ground check control cable allows monitory all the time ground circuit conductors to give maximum safety level.

 

Detail Description & Construction 

 

Conductor Extra- flexible copper conductor, according ASTM B3
Conductor Shield Semi-conducting tapes shield applied helically over the conductor
Insulation 100% insulation level oil, ozone and water resistant Ethylene propylene rubber (EPR) 90°C normal temperature operation, 130°C emergency overload condition, 250°C short circuit condition
Insulation shield Up to 2kV polyester tape applied over the insulation; over 2kV semi-conducting tapes shield applied over the insulation
Metallic shield Tinned copper braid (60% minimum coverage) over each conductor
Phases identification By colored fibers Black, White and Red
Ground wires Two bare, rope-lay flexible stranded, copper conductors
Ground check One yellow insulated, rope-lay flexible stranded, copper conductor
Core assembly Three phase conductors, two bare ground and one ground check conductors are cabled together with a left hand lay, plus a binder tape applied over the assembly
Reinforcement An open reinforcement is applied over the core for mechanical strength
Jacket Extra heavy duty elastomer jacket highly resistant to cutting, tear, sunlight, ozone and flame. It has an excellent resistance to heat, moisture, water, oil and most chemicals commonly present at mining field operations. The standard jacket is black and meets or exceeds all the requirements of ICEA S75-381. Alternate jacket colors are available as request

 

Packaging
Non-returnable wooden drums.


Options
• Thermoplastic Polyurethane (TPU)
• Jacket (MSHA approved)
• Jacket colors
• Put-up length (300 m)


Standards/Testing
SHD-GC meets or exceeds the requirements of ICEA S-75-381, ICEA S-68-516 and is MSHA approved using TPU jacket.
Marking
SHD-GC.
Installation
SHD-GC can be used in outdoors locations under very severe environmental conditions such as the one commonly present at mining places. Conductor design and raw materials used, allows the cable to be installed directly on rough mining fields, not requiring any previous preparation.

 

 

CABLE TYPE SHD-GC 2 kv
Conductor
Size
Nominal
Area
No.
Threads
Minimum
Conductor
Diameter
Insulation
Thickness
Grounding
Conductor
Size
Control
Conductor
Size
Jacket
Thickness
OD
Nominal
Approx.
Total
Weight
Min.
Bending
Radius
Ampacity
AWG / MCM mm2 mm mm AWG AWG mm mm kg / km mm A  
6 13.3 49 5.49 1.78 10 8 3.94 32.8 1,799 197 93
4 21.2 49 6.82 1.78 8 8 3.94 35.5 2,220 214 122
3 26.7 49 7.77 1.78 7 8 4.32 38.4 2,633 230 140
2 33.6 133 8.68 1.78 6 8 4.32 40.4 2,968 242 159
1 42.4 133 9.83 2.03 5 8 4.83 44.7 3,640 268 184
1/0 53.5 133 10.98 2.03 4 8 4.83 47.2 4,189 283 211
2/0 67.4 133 12.68 2.03 3 8 5.21 50.8 4,694 305 243
3/0 85 259 13.89 2.03 2 8 5.21 54.1 5,817 325 279
4/0 107 259 15.79 2.03 1 8 5.59 58.7 6,983 352 321
250 127 259 16.84 2.41 1/0 8 5.59 63.8 8,280 383 355
350 177 259 20.24 2.41 2/0 8 5.97 71.5 10,689 429 435
500 253 259 23.92 2.41 4/0 8 6.73 81.0 14,483  485 536


 

CABLE TYPE SHD-GC 5 kV
Conductor
Size
Nominal
Area
No.
Threads
Minimum
Conductor
Diameter
Insulation
Thickness
Grounding
Conductor
Size
Control
Conductor
Size
Jacket
Thickness
OD
Nominal
Approx.
Total
Weight
Min.
Bending
Radius
Ampacity
AWG / MCM mm2 mm mm AWG AWG mm mm kg / km mm A  
6 13.3 49 5.49 2.79 10 8 4.70 39.6 2,327 238 93
4 21.2 49 6.82 2.79 8 8 4.70 42.7 2,815 256 122
3 26.7 49 7.77 2.79 7 8 5.21 45.2 3,237 271 140
2 33.6 133 8.68 2.79 6 8 5.21 47.5 3,631 285 159
1 42.4 133 9.83 2.79 5 8 5.21 49.5 4,101 297 184
1/0 53.5 133 10.98 2.79 4 8 5.59 52.8 4,767 317 211
2/0 67.4 133 12.68 2.79 3 8 5.59 55.9 5,514 335 243
3/0 85 259 13.89 2.79 2 8 5.97 59.9 6,490 359 279
4/0 107 259 15.79 2.79 1 8 5.97 63.5 7,556 381 321
250 127 259 16.84 3.05 1/0 8 6.35 68.3 8,850 410 355
350 177 259 20.24 3.05 2/0 8 6.73 74.9 11,120 449 435
500 253 259 23.92 3.05 4/0 8 7.11 84.1 14,886 505 536

 

CABLE TYPE SHD-GC 8 kV
Conductor
Size
Nominal
Area
No.
Threads
Minimum
Conductor
Diameter
Insulation
Thickness
Grounding
Conductor
Size
Control
Conductor
Size
Jacket
Thickness
OD
Nominal
Approx.
Total
Weight
Min.
Bending
Radius
Ampacity
AWG / MCM mm2 mm mm AWG AWG mm mm kg / km mm A  
4 21.2 49 6.82 3.81 8 8 5.21 49.3 3,397 394 122
3 26.7 49 7.77 3.81 7 8 5.21 51.3 3,786 410 140
2 33.6 133 8.68 3.81 6 8 5.59 53.8 4,223 430 159
1 42.4 133 9.83 3.81 5 8 5.59 56.1 4,745 449 184
1/0 53.5 133 10.98 3.81 4 8 5.59 58.9 5,373 471 211
2/0 67.4 133 12.68 3.81 3 8 5.97 62.5 6,211 500 243
3/0 85 259 13.89 3.81 2 8 6.35 66.5 7,218 532 279
4/0 107 259 15.79 3.81 1 8 6.35 69.9 8,276 559 321
250 127 259 16.84 3.81 1/0 8 6.35 73.4 9,396 587 355
350 177 259 20.24 3.81 2/0 8 7.11 81.3 11,913 650 435
500 253 259 23.92 3.81 4/0 8 7.49 90.4 15,686 723 536


 

CABLE TYPE SHD-GC 15 kV
Conductor
Size
Nominal
Area
No.
Threads
Minimum
Conductor
Diameter
Insulation
Thickness
Grounding
Conductor
Size
Control
Conductor
Size
Jacket
Thickness
OD
Nominal
Approx.
Total
Weight
Min.
Bending
Radius
Ampacity
AWG / MCM mm2 mm mm AWG AWG mm mm kg / km mm A  
2 33.6 133 8.68 5.33 6 8 5.97 61.2 5,210 490 164
1 42.4 133 9.83 5.33 5 8 5.97 64.0 5,849 512 187
1/0 53.5 133 10.98 5.33 4 8 6.35 67.1 6,580 537 215
2/0 67.4 133 12.68 5.33 3 8 6.35 69.3 7,272 554 246
3/0 85 259 13.89 5.33 2 8 6.73 73.7 8,420 590 283
4/0 107 259 15.79 5.33 1 8 6.73 77.5 9,616 620 325

 

You Might Be Into These
Get in touch with us

Enter Your Message

andrea@cncablegroup.com
+8613598873045
yxcuicui
yxandrea